Ultrasonic thickness testing
Ultrasonic thickness testing with a calibrated ultrasonic thickness gauge gives pipe wall thickness measurement from the outside surface.
How much metal is left in an aging pipe? We measure wall thickness and coating condition non-destructively, so rehabilitation money goes where it is needed most.

Corrosion thins pipe walls from the inside and outside long before a pipe fails. Ultrasonic thickness testing measures the remaining wall from the outside surface only, without draining the pipe or cutting a sample.
We also measure dry film thickness and inspect protective coatings on pipes, tanks and steel structures, confirming that coatings meet specification and identifying areas at risk. Results feed directly into pipeline integrity assessment and asset management plans.
Ultrasonic thickness testing with a calibrated ultrasonic thickness gauge gives pipe wall thickness measurement from the outside surface.
Dry film thickness measurement confirms that protective coatings on pipes, tanks and steelwork meet their specified thickness.
Pipeline condition assessment combines thickness, coating and CCTV results into a ranked list of sections to monitor, repair or replace.
We choose test locations based on risk, age and material.
Ultrasonic and coating gauges record thickness at each point.
Readings are compared with nominal values and corrosion allowances.
We rank sections for monitoring, repair or replacement.

An ultrasonic device that measures the remaining wall thickness of pipes and vessels non-destructively, without access to the inner surface. It is...
Measures the thickness of cured protective coatings on steel pipes, tanks and structures, confirming coatings meet specification.

A remotely operated camera crawler that travels inside pipelines and records internal pipe condition. It enables condition assessment of water and...
An ultrasonic thickness gauge sends a sound pulse through the wall from the outside surface and measures the echo from the inner surface, giving the remaining thickness non-destructively.
Dry film thickness (DFT) testing measures the thickness of a cured protective coating, to confirm it meets the specified protection level.
It shows which sections are close to failure, so utilities can repair or replace them before bursts cause water loss, service interruption and damage.